PROFESSIONALLY FITTED CUSTOM GOLF CLUBS

We have a large selection of clubs, each of which we will custom fit to your specifications using our exclusive "Flex-Fit Tour System".
All of our golf clubs are built on our premises, in our professionally equipped workshop by a master clubmaker. In the following paragraphs are some of the explanations about our custom club fitting program. Finally, there's a way to purchase custom fitted golf clubs at a reasonable price that can make it more of a pleasure to play.
If you are in or near Akron, OH., please come to our shop and test hit our demos of the styles of clubs we offer.

WE CAN PROFESSIONALLY FIT ANY BRAND OF GOLF CLUBS TO YOU!
TAYLOR-MADE - CALLAWAY - TITLEIST - MIZUNO - CLEVELAND - ADAMS - COBRA, etc.
DON'T BUY THEM UNTIL YOU TALK TO US!
WE'LL TELL YOU HOW TO GET THE BRAND YOU WANT EXACTLY FITTED TO YOU!
CALL US FOR THIS INFORMATION - 330.253.8000

The largest misconception about buying professionally fitted golf clubs is that you need a perfect swing to be fitted correctly. It is not true! Although we have fitted many professionals, you do not need to have the skill of a professional to be fitted properly.
Through our swing analysis, we can determine where you may need corrections made in your grip, set-up, alignment and address. It becomes more or less a free instruction session!
Remember, you can be fitted properly with any skill level you have.

With our expertise, you will be fitted for proper length (to the 16th of an inch), proper lie angle (to the exact fraction of degree), proper flex (one of our range of over 40), proper flex point for your swing and the club head you choose and proper grip size (to the 64th of an inch).
We arrive at all of these fitting specifications using a combination of dynamic and static measurements.
If your fitting was determined by someone asking you how tall you are, you are not fitted properly! Your height is not the factor that should be used by a professional clubfitter. Also measuring from wrist to floor alone is not professional clubfitting either. There are many factors involved to fit you properly. We do those things required to fit you the right way.
We have a tried and true formula that has been used successfully with many golfers since 1992.

We measure your swing factors with an electronic system we found to be the best for our fitting process and our clients. The use of the Auditor Monitor and it's matching computer software program, the Tempo Trainer 911, PRGR Launch Monitor, TrueTemper Shaft Load Determinator and/or "Swing Speed" Doppler Radar Sports Sensor gives us the exact data that we require to determine your proper fitting.
Our system measures your exact clubhead speed at impact in tenths of miles per hour. Also measured is your exact swing tempo, from clubhead take-away to clubhead impact, in tenths of seconds. With this data, we can determine the exact flex, flex point and swing-weight factors to make a proper determination about how our clubmaker will bench make your golf clubs.

• 40 FLEXES - We have a flex that will fit you. DV Golf/Akron Golf Clubs has over 40 different flexes. Therefore, if you're like many players we've fitted over the years, you could fall in between common flex categories.
  There is no such thing as "Uniflex" in professional club fitting!
  Our formula can get it right for you.
  When it comes to shaft flex being right for you, I'm sure you'll agree that because we are able to choose from many ranges each of Ladies, Senior, Regular, Firm or Stiff rather than just 1 Ladies, 1 Senior, 1 Regular or 1 Stiff is a better way to pick your flex. The other thing we want to make clear is that from our experience most clubs we've checked in our shop, on our cpm frequency indication meter or shaft deflection board, have been made much stiffer than the golfer thought they were getting. We can fit you for a flex that will be more exactly suited to the way you need your clubs to react to your swing. When you buy clubs off the rack, there's no guarantee that the flexes or swing-weights in a set of irons or woods will match. Therefore, it makes no sense to work on getting your swing consistent when your clubs aren't matched and consistent.
  We also do our best to align all the shafts to make each one react the same way to your swing!
  ABOUT SWING WEIGHT MATCHING
  At DV Golf/Akron Golf Clubs we always match the club swing-weight and we'll make sure your clubs are right. Now you can work on your tempo and get it right, because your body's swing depends on what it feels in the dynamic of swinging the club. When the swing-weight is matched throughout your set of clubs, your body feels consistency. Every club feels the same to your body's swing. That is how your swing tempo becomes consistent. THAT'S OUR GUARANTEE!

  Even if you buy a set of irons and woods from us at different times, they will be matched, because we keep a record of every club we make for you. Even if you lose an iron, we can replace it and you can be sure it's the same as the rest of the set. That's something you won't get from buying clubs off the rack! That means your new clubs are a truly registered set.

  ABOUT SHAFT MATERIAL
  If you like to play with a lot of feel in your swing, we can achieve that for you, without you having to over swing and lose accuracy and distance.
  We will tell you that we recommend steel shafts over graphite shafts, unless you have a severe impact problem, because with graphite shafts you may be giving up 30% to 50% of the feel needed to keep your swing and tempo consistent.
  Most impact problems can be overcome by using a "softer" tip steel shaft and/or our exclusively owned "AVS ShaftSerts" or our exclusive "AirShaft System". Call us, we'll tell you about these systems, that were developed by us and can only be found in clubs made by Akron Golf Clubs.
  There is no golf business in Northeast Ohio that does what we do, nor the way we do it!

  DV Golf/Akron Golf Clubs fitting includes:

• 1) - Your exact length of club.
• 2) - Your exact lie angle of clubhead to match your body and swing specifications.
• 3) - Your exact grip size.
• 4) - You also have your choice of many styles of grips, not just what the manufacturer chooses.
• 5) - The shaft type that will optimize your shots.
• 6) - Your exact shaft flex determined by your clubhead speed and elapsed time of swing.
• 7) - The shaft flex-point that suits the trajectory traits of your clubhead choice.
• 8) - Matched swingweights suited to your swing timing and strength.
• 9) - All shafts are flex-fitted to react to your swing the same way.
• 10) - Loft and lie angle adjustments of your fitted clubs are checked free of charge for as long as you own them.
• 11) - Your fitted clubs will be "bench-made" in our workshop to assure exact specifications.
• 12) - Free instruction "fixes" as long as you're playing the clubs we fitted for you.

  If you have questions about fitting, call us. (330.253.8000,11am-3pm E.T., Tues-Sat)
  No appointment needed. Just come in.......

  CLICK HERE FOR A LIST TO PRINT OUT AND TAKE WITH YOU TO SHOP OTHER GOLF CLUB SELLERS/FITTERS

  MASTER CLUBMAKERS | MASTERCLUBFITTERS | PROFESSIONALLY FITTED CLUBS | INSTRUCTION | GOLF CLUB SERVICES | NEW MODELS
  ON SALE NOW! | KZG CLUBS | ENDORSED PRODUCTS&LINKS | CUSTOMER TESTIMONIALS | SPECIAL PROGRAMS & INFORMATION